Once you have the external drive or USB and the High Sierra installer ready, use the Terminal app to create a boot disk. Your USB stick should appear as gold/yellow and labelled ‘EFI Boot’.Clonezilla Live on USB flash drive or USB hard driveCreate a bootable High Sierra installer with Terminal. This will launch Apple’s ‘Startup Manager’ which shows bootable devices connected to the machine. If you want to use your USB stick with an Apple Mac, you will need to restart or power-on the Mac with the USB stick inserted while the Option/alt () key is pressed.Step 2: As soon as the startup process begins, hold down the Option (alt) key and keep it depressed until you see the Startup Manager on your screen. 2.Step 1: Insert the bootable USB into Mac and power it on. Connect the HighSierra USB drive to your Mac.
What Program Should I Use To Make A Bootable Usb Zip File To TheKeep the directory architecture, for example,File "GPL" should be in the USB flash drive'sThat's all. Make sure you have extractedAll the directories and files, including the ".disk" dir and theFiles under it. Download the amd64 (x86-64) version of Clonezilla Live zip file.If you already have a partition of at least 500 MB in size on yourUSB flash drive formatted with a FAT (not NTFS) file system then skip toOtherwise create at least a 500 MB partition on your USB flashDrive and format it with a FAT16/FAT32 (not NTFS) file system.To extract all the contents of the zip file to the FAT16/FAT32Partition on your USB flash drive. If you want to create a bootable USB flash drive/hard drive only for uEFI boot mode, it can be either GPT (recommended) or MBR (msdos) format.Depends on the boot mode for the machine you want to boot with the USB flash drive, choose one of the following methods to setup Clonezilla Live on your USB flash drive using MS Windows: A USB flash drive or USB hard drive has the MBR (msdos) partition table and a free partition. Internet access for downloading a distribution to install, or a pre-downloaded ISO file. Serial experiments lain opening lyricsKeep the directoryArchitecture, for example, file "GPL" should be in the USBFlash drive's top directory (e.g. MS Windows Method A: ManualDO NOT RUN makeboot.bat from your local hard drive!Doing so could cause your MS windows not to boot!!!USB flash drive formatted with a FAT or NTFS file system then skip to theDrive and format it with a FAT16/FAT32 or NTFS file system.Extract all the contents of the zip file to the FAT16/FAT32 or NTFSPartition on your USB flash drive. MS Windows Method D: LinuxLive USB CreatorNOTE: If you use FAT file system in one of the above methods, the installed USB flash drive should be able to boot both on uEFI and legacy boot modes. Let's say, for example, that you find it is/dev/sdd1. Next, run the command"dmesg" to query the device name of the USB flash drive or USBHard drive. Be sure to confirm the command before you run it.Insert your USB flash drive or USB hard drive into the USB port onYour Linux machine and wait a few seconds. Gparted, parted, fdisk,Cfdisk or sfdisk) to create a partition with a size of 500 MB orHere we assume your USB flash drive or USB hard drive is /dev/sdd( You have to comfirm your device name, sinceIt's _NOT_ always /dev/sdd) on your GNU/Linux, so theDisk /dev/sdd: 12.8 GB, 12884901888 bytes15 heads, 63 sectors/track, 26630 cylindersUnits = cylinders of 945 * 512 = 483840 bytes/dev/sdd1 * 1 26630 12582643+ b W95 FAT32Then format the partition as FAT with a command such as "mkfs.vfatOn the wrong partition or device could cause your GNU/Linux not toBoot. GNU/Linux Method A: ManualConfirm you have the correct path name before executing commands!Failure to do so could cause loss of data or your GNU/Linux not to boot!!!If you already have a FAT or NTFS partition on your USB flashOtherwise prepare at least a 500 MB partition formatted with either a FAT16/FAT32 or NTFS file system.If the USB flash drive or USB hard drive does not haveAny partition, you can use a partitioning tool (e.g. Therefore it isIf you already have LinuxLive USB Creator installed on your computer thenInstall LinuxLive USB Creator on your MS Windows computer.From Windows, install then run the LinuxLive USB Creator program and follow theDepends on the boot mode for the machine you want to boot with the USB flash drive, choose one of the following methods to setup Clonezilla Live on your USB flash drive using GNU/Linux:Mount the FAT16/FAT32 file system of your USB flash drive, e.g.,Assuming the FAT16/FAT32 file system of your USB flash drive is /dev/sdg1,Then unzip the clonezilla live amd64 zip file to the FAT16/FAT32# unzip clonezilla-live-2.7.3-21-amd64.zip -d /media/disk/Choose one of the following methods to setup Clonezilla Live on yourNOTE: If you use FAT file system in one of the above methods, the installed USB flash drive should be able to boot both on uEFI and legacy boot modes. Keep the directoryFlash drive or USB hard drive's top directoryTo make your USB flash drive bootable, first change the workingDir, e.g. You can do this with a command such as: "unzipClonezilla-live-2.4.2-32-i686-pae.zip -d /media/usb/"). IfIt's not automatically mounted, manually mount it with commandsSuch as "mkdir -p /media/usb mount /dev/sdd1 /media/usb/".Unzip all the files and copy them into your USB flash drive or USBHard drive. Os x sierra in vmware playerMake sure you run it on newer GNU/Linux than that.If your USB flash drive or USB hard drive is not able to boot, checkEnsure that your USB flash drive contains at least one FAT or NTFS partition.Ensure that the partition is marked as "bootable" in the partition table.Ensure that the partition starts on a cylinder boundary.For the first partition this is usually sector 63.Otherwise install Unetbootin on your GNU/Linux computer. Be sureTo confirm the command before you run it.NOTE: There is a known problem if you run makeboot.sh on DebianEtch (4.0), since the program utils/linux/syslinux does not workProperly.
0 Comments
Leave a Reply. |
AuthorTaryn ArchivesCategories |